Any rod recommendations for Calcutta Conquest 201hg

ripxor
Hi guys, recently brought a calcutta conquest 201hg. Anyone got any recommendation as to what rods to pair with it? 

Main usage is for offshore day/night fishing
  • VinceVCZ
    very good for luring,super smooth casting from light to heavy.
    upgraded handle(omoto) for slow jigging up to 200g can reel-in with 2 fingers,the micro module gear does improve the torque.
    bottom fishing abit waste but can up to sinker no.12(upgraded handle) or no.6(original).
    u can pair it with a jigging rod with PE 1-3(tip) & 2-4(backbone)
    i pair it with expert graphite hammerhead PE 3.5
    luring ,slow jigging & light or medium bottom,versatile.
    braided PE2-3 suggested
    not reccomanded to use at water depth more then 40meters
    this reel i gv 9.9 point ,0.1 deducted bcoz of capacity.
  • ayeosq
    VinceVCZ said:
    very good for luring,super smooth casting from light to heavy.
    upgraded handle(omoto) for slow jigging up to 200g can reel-in with 2 fingers,the micro module gear does improve the torque.
    bottom fishing abit waste but can up to sinker no.12(upgraded handle) or no.6(original).
    u can pair it with a jigging rod with PE 1-3(tip) & 2-4(backbone)
    i pair it with expert graphite hammerhead PE 3.5
    luring ,slow jigging & light or medium bottom,versatile.
    braided PE2-3 suggested
    not reccomanded to use at water depth more then 40meters
    this reel i gv 9.9 point ,0.1 deducted bcoz of capacity.
    ​Where do you get the upgrade parts for this reel?
  • Luke Maow Bear
    VinceVCZ said:
    very good for luring,super smooth casting from light to heavy.
    upgraded handle(omoto) for slow jigging up to 200g can reel-in with 2 fingers,the micro module gear does improve the torque.
    bottom fishing abit waste but can up to sinker no.12(upgraded handle) or no.6(original).
    u can pair it with a jigging rod with PE 1-3(tip) & 2-4(backbone)
    i pair it with expert graphite hammerhead PE 3.5
    luring ,slow jigging & light or medium bottom,versatile.
    braided PE2-3 suggested
    not reccomanded to use at water depth more then 40meters
    this reel i gv 9.9 point ,0.1 deducted bcoz of capacity.
    ​Impressive review.
  • VinceVCZ
    @ayeosq u can get it at most tackle shop,there are 2 sizes,shimano(smaller) & daiwa(bigger),the sizes is the hole for to attached to the reel.i think i saw recently someone selling omoto handle for S$30,i think about S$20+ for 2nd hand to be fair,coz i get mine for new only S$30.there are 2 hole for diff length,i put 2nd hole shorter coz i feel it alrdy very powerful.too long might damage the gear too.
  • ayeosq
    which tackle shop you bought from, I tried a couple and they sell them 100 and up...
  • VinceVCZ
    ayeosq said:
    which tackle shop you bought from, I tried a couple and they sell them 100 and up...
    ​shouldn't be,i bought from malaysia retail price RM120,after discount RM90 . Singapore i rmb its about +-S$40.
  • VinceVCZ
    VinceVCZ said:
    very good for luring,super smooth casting from light to heavy.
    upgraded handle(omoto) for slow jigging up to 200g can reel-in with 2 fingers,the micro module gear does improve the torque.
    bottom fishing abit waste but can up to sinker no.12(upgraded handle) or no.6(original).
    u can pair it with a jigging rod with PE 1-3(tip) & 2-4(backbone)
    i pair it with expert graphite hammerhead PE 3.5
    luring ,slow jigging & light or medium bottom,versatile.
    braided PE2-3 suggested
    not reccomanded to use at water depth more then 40meters
    this reel i gv 9.9 point ,0.1 deducted bcoz of capacity.
    ​Impressive review.
    if its too long i can write another simple review for the reel as below.
    "its a good reel"
    hahaha
TRIPS
© Copyright 2016
All times are UTC